Posted: December 25th, 2015
Question 2.2
A loaded structural component, shown in Fig Q2.2, is manufactured from Titanium alloy having a Young’s modulus, E = 114000 MPa and a Poisson’s ratio, n = 0.3. The component is 1.5 mm thick and subjected to a load of 150 N.
Complete a Finite Element Analysis of the given problem using the ANSYS Parametric Design Language (APDL) and present the following. Wherever possible you should use data in the form of figures from your finite element analysis to strengthen the report (no word limit).
A finite element meshed model of the problem showing boundary conditions, element size and element type used.
Place an order in 3 easy steps. Takes less than 5 mins.