Posted: December 8th, 2015
Comprehensive Authentic Assessment Plan Deliverables
For this course AAP is a response for customer’s RFP or customer’s design requirements and type of solution used in network design. Typically a customer’s RFP includes following topics.
Your AAP should include responses to all of customer’s RFP and should include logical and physical component pf the design, information on technologies used in design solution, and proposal to implementing the design. The following sections describe the format of AAP:
A: Executive Summary (ES) –
The executive summary briefly states and emphasizes the major points of the customer’s requirements. The ES should be no more than one page and should be directed at key decision maker of the project who will decide whether to accept your design. The ES can have minimum technical information but NO technical details. The technical information should be summarized and organized in order of the customer’s highest-priority objectives for the design project. The ES should be organized customer top requirements.
B: Project Goal —
This section should state the primary goal for the network design. The goal should be business oriented and related to an overall objective that organization has to become more successful in core business. Your objective is to make it clear to decision maker that you understand the primary purpose and importance of the network design project. Below is an example of project goal was written for an actual design.
“The goal of this project is to develop a wide area network (WAN) that will support new high bandwidth and low-delay multimedia applications. The new applications are key to the successful implementation of new training programs for the sales force. The new WAN facilitate of increasing sales in the USA by 50% in the next fiscal year.”
C: Project Scope —
The project scope section provides information on extent of the project, including a summary of departments, field offices networks that will be affected by the project. The project scope section specifies whether the project is new network or modifications to an existing network. It indicates whether the design is for a single network segment, a set of LANs, a building or campus network, or a set of WAN or remote access network, VoIP, or enhancing security
D: Design Requirements
In this section, you provide major business and technical requirements of the network in priority order. In business goal explain the role network design will play in helping an organization provide better products and services.
The technical requirement section explain in general term how propose technical improvement is better than or meet the customer requirement.
Network Application: This section lists and characterizes the new and existing network applications.
This section will include an online presentation in PowerPoint. Presentations should include the information in parts 1 through 4 of the AAP. You will be evaluated on the content and design of your presentation.
The purpose of this presentation is to get approval from upper level management. This presentation is geared towards upper management level. In this presentation two much details, or by providing too much technical content you could lose your audience. You need a balance approach. That means keep your focus on key business goals and explain them in simple language how this project will help in meeting those goals. There is no minimum or maximum numbers of slides for this presentation.
E: Current State of the Network:
This section briefly describes the structure and performance of the network. It should include a high-level network map that identifies the location of connecting devices, server farm, storage systems, and network segment
F: Design Solution:
This section includes:
G: Implementation Plan:
The implementation plan includes your recommendations for deploying the network design. The design implementation description should be detailed as possible. Implementation of a network design consists of several phases (buy and install hardware, configure system, test system and so forth). Each phase consists of several steps, and documentation for each step should contain the following:
Sample Project Schedule Template
|Date of Completion||Project Milestone|
|August 1||Design completed and a beta version of the design document distributed to key executives, managers, network administrators, and end users (end users depends on management)|
|August 15||Comments on the design document due|
|August 22||Final design document distributed|
|August 25||Installation of leased lines between all buildings completed by WAN service provider|
|August 28-29||Network administrators trained on new system|
|August 30-31||End users trained on new system|
|September 6||Pilot implementation completed in Building 1 or head office or branch office|
|September 20||Feedback received on pilot from network administrators and users|
|September 27||Implementation completed on Buildings 2-5 or floors 1-6|
|October 10||Feedback received from buildings 2-5 from network administrators and users|
|October 17||Implementation completed in the rest of buildings or floors|
|Ongoing or December 31||New system monitored to verify that it meets goals|
H: Project Budget –
This section should contain the funds the customer needs for equipment purchases, maintenance, and support agreements, service contracts, software licenses, training, and staffing. The budget can also include consulting fees and outsourcing expenses.
I: Design Document Appendix –
Most design documents include one or more appendixes that present supplemental information about the design and implementation. Supplemental information can include detailed topology drawings, device configurations, network addressing and naming details and comprehensive results from the testing of the network design. You can include business information such as list of contact name, numbers and e-mail addresses. The appendix can include warranty on devices, legal agreement, and any information which is not critical for design, but you have noted in your gathering information process.
Paper must have a minimum of 25 pages and a maximum of 35 pages of text excluding the required title page and bibliography and optional tables. Text must be Times New Roman, 12 font, 1″ margin on all sides, and double spaced.
Students must follow “Publication Manual of the American Psychological Association, Fifth Edition (APA- 5)”, also known as APA style or format. Only a Microsoft Word file will be accepted as the final submission; no HTML or PDF files allowed.
All sources must be properly cited and must be credible. At least two sources must be Internet sources (for help in evaluating the credibility of web sources, go to www.umuc.edu/library/guides/evaluate.shtml). Once you have completed a good draft, it is strongly advised that you submit it to UMUC’s Effective Writing Center (EWC). In order to allow sufficient time for their review, you need to submit the draft to EWC two weeks prior to the paper’s due date.
Place an order in 3 easy steps. Takes less than 5 mins.